An antenna with a range of 5 meters is located in the gate opening. If the antenna picks up a signal from the controller within range, it will instruct the receiver to open the gate. The remote controls are located on the AMR cart. The system works automatically without the need to press any button on the remote control, just move closer to the antenna.
The solution contains one receiver and a controller resp. drivers as needed.
AMR (automated mobile robots) are equipped with various security features. With their correct setting, it is possible to achieve even higher security compared to manually managed logistics means. Ideally, however, none of these safety features should be activated during AMR operation. Additional safety features are used for this. This sound or light equipment serves as a signal of possible danger.
The directional arrow is similar to a bluespot, in which case the blue light is replaced by a bright red light arrow on the floor in front of the AMR. Thanks to this traffic light, it is possible to ensure timely notification of the approaching AMR robot to workers working near its track.
The Pallet stacker AGV is used for automated storage of finished production on pallets on racks up to a height of 400 cm. It can solve the given request completely. By using a control system with a dispatching system, you no longer have to worry about Task Assignment and Priority Management. he system is fully autonomous. Using SLAM navigation doesn´t require additional magnetic tape for localization, so operation is much more convenient without additional costs (the renewal of magnetic tape).
The Mini forklift AGV standard lift allows you to handle loads placed on a pallet placed on the floor. It doesn’t require any additional equipment to load the pallet from the floor, because autonomous manual robot transports it to designated location and lays it on the floor. Thanks to SLAM navigation, it does not require additional magnetic tape for localisation, so operation is much more convenient without additional costs (the renewal of magnetic tape).
SLAM navigation enables the localization of the robot without installing navigation elements such as magnetic tape or QR codes. AMR model IF 1502 is a small truck with a relatively high load capacity of up to 1500 kg and a lifting height of 205 mm. It can handle heavy loads from the ground to the ground, or handling from low conveyors. Its main advantage is a high speed of up to 2 meters per second, which it manages safely even when fully loaded. The high transport performance combined with the possibility of quick battery exchange creates a very interesting opportunity to reduce the number of AMR robots in the considered logistics solution.
SLAM navigation enables the localization of the robot without installing navigation elements such as magnetic tape or QR codes. The AMR model IF 0620 has compact dimensions and is additionally equipped with omnidirectional wheels, thanks to which this robot can reach even the narrowest alleys, which are inaccessible for standard steering carts. In addition, it has a lifting height of up to 2 meters, which enables handling of the pallet on conveyors or also on the shelf.
SLAM navigation enables the localization of the robot without installing navigation elements such as magnetic tape or QR codes. The AMR model IF 2025 is a powerful truck with a maximum load capacity of up to 2000 kg and a lift height of up to 2500 mm, designed for handling more demanding tasks with heavy loads, including loading to higher places. The higher requirements for the width of handling aisles are compensated by the possibility of automated establishment, e.g. also to the shelf and thereby increases the productivity of the available production or storage areas.
AMR (automated mobile robots) are equipped with various security features. With their correct setting, it is possible to achieve even higher security compared to manually managed logistics means. Ideally, however, none of these safety features should be activated during AMR operation. Additional safety features are used for this. This sound or light equipment serves as a signal of possible danger.
The warning beacon warns in all directions of the presence of an AMR robot. AMR robots are very flexible and can move in different directions, rotate on the spot or back up. The warning beacon helps to increase attention and caution in this area.
SLAM navigation enables the localization of the robot without installing navigation elements such as magnetic tape or QR codes. The AMR model IF 3002 is a robust truck with a maximum load capacity of up to 3000 kg and a lifting height of 200 mm. It can handle heavy loads from the ground to the ground or handling from low conveyors. Where the weight of the load was a limit and required the use of large trucks (requirements for a large handling space), space is opened for the use of the still compact AMR robot.
AMR (automated mobile robots) are equipped with various security features. With their correct setting, it is possible to achieve even higher security compared to manually managed logistics means. Ideally, however, none of these safety features should be activated during AMR operation. Additional safety features are used for this. This sound or light equipment serves as a signal of possible danger.
A bluespot is a blue light displaying a blue “spot” on the floor in front of an AMR robot. A blue light indicates that an AMR robot is entering this area. It is a warning of the possible danger of a collision with an AMR robot.
The calling system can send different types of dispatching instructions, which can define different calling requests. The buttons can have the function of starting a job, canceling a job, or displaying multiple statuses. Support for built-in power with a lithium battery that is replaceable and lasts up to 30 days. The calling system has DC power support. It is possible to choose different numbers of buttons according to customer needs. Call buttons are suitable for AGVs, robots, workshop production lines, automation devices and other cases requiring instructions based on wireless communication.
The pallet stacker allows automatic storage and retrieval of pallets via AMR, thus maintaining a consistent flow of pallets within each company. Each job performed is communicated through the exchange of signals between the pallet stacker and the AMR.
To ensure safe and even stacking of pallets, the stacker is equipped with a bottom frame and castors on the side plate, which ensure adapted placement and stabilization. For consistent pallet flow, the pallet stacker automatically informs the AMR when the pallet hopper needs to be emptied, using the installed maximum indicator for 15 pallets.
In addition, for greater safety, the pallet stacker is installed with a safety light sensor on each side.
The AGV Management system is used to control the operation of automatically guided trucks from a single truck to complex integrated systems of several AGVs. The AGV control system is built on an open platform, which allows connection to a number of systems for different requirements and applications. The main features of the control system are:
© 2022 iGrow Network Tvorba web stránok TOMARCO
Processing of technology rental offer
Choose the technology you are interested in and we will prepare an offer for you to rent this technology. We will contact you within a few days with the prepared offer.
Financing offer processing
Choose the technology you need to refinance and we will prepare a financing offer for you. We will contact you within a few days with the prepared offer.
